Sunday, January 29, 2012

A Quick Mickey and Minnie Valentine Using My Cricut Imagine

I haven't had my Cricut Imagine hooked up to my computer and the Cricut Craft Room since it returned from the factory.  Today, I decided to take the chance and see if I could get it to print and cut. The connection is still a little faulty.  Out of five prints, two of them would not cut.  I like the idea of being able to color all of the layers, individually, on the Cricut cartridges and print them out on one piece of white card stock.  I pulled out my Mickey and Friends cartridge and decided to test the system to make a Valentine's Day card.  I placed all of my images on the mat in the online Craft Room and sent them to the Imagine to cut.  The images began to print out one by one.  The machine goes to cut and spits out the mat without cutting.  I close out the machine, save my design and exit Craft Room.  I then try to log back in and get a service error.  I close everything out, turn of the machine, disconnect from the internet and try again.  This time I get my saved Mickey file to load and I send it to the Imagine for cutting only.  Yeah!! It worked. The images on the lowest part of the mat were off just a little bit in cutting, but this was easily fixed using my Copic markers to color the white edges.  I pieced all the colored layers together using my trusty Elmer's glue stick.  I then found a background design for my card using paper from the Paper Studio.  I used my white Gelly Roll pen to accent the die cuts just a hint.  I then used foam adhesive squares to mount all the images to the card. 
     I really love the whole idea of the Craft Room and the Imagine.  I hope that Provo Craft can issue an update soon that removes all the "bugs" people have been experiencing with this duo.  I love having the ability to move the images around on the Imagine mat with Craft Room.  I also love being able to see the welding of images on a larger screen.  Someday I hope to see the capabilities to combine all the layers of an image together, flood fill them with their respective colors and print and cut them with the Imagine.
    Hope you have a great week and thanks for stopping by!!       Patty

Saturday, January 28, 2012

Birthday Card and Cake!!

I got a couple of great new Cricut cartridges from Ebay this week and couldn't wait to try them out.  The card is made using the Cricut Imagine Yummy Cartridge.  The background paper for the card is from the Wild Asparagus Collection from My Mind's Eye.  I used the sentiment, stacked cake, and border from the Yummy cartridge.  I added a cake embellishment from my scrapbook stash and a small sheer bow.  I glitzed up the edges of the sentiment using Stickles.   My second creation is a simple cake-shaped goody box.  I just love all the projects from the Sweet Tooth Boxes cartridge.  I decided to make this simple cake box and fill it up with sweets.  The project took all of ten minutes to cut and put together.  I used Cricut Craft Room and my E2 for this project.  The paper is from the Wild Asparagus Collection as well.  I frosted the edges of the cake with some Liquid Pearls and used some Stickles for a little glitz.  I topped my cake with whipped cream pom poms and a glitzy matching cherry!! I look forward to trying more projects from this cartridge.  Thanks for stopping by and have a great weekend!!

Sunday, January 22, 2012

A Valentine with a Romantic Flair!!

Most of my Valentine's Day cards, created thus far, have been on the cutesy side.  Today I decided to stray off the beaten path and create a Valentine's Day card using Cricut Craft Room, Gypsy Wanderings, and my Cricut Expression 2.  First, I must say that I love the wireless capabilities of the E2.  I am so pleased my husband got it for me as a Christmas gift.  Maybe he deserves today's Valentine card!! Okay, back to the card.  I used black background paper from Cloud 9 Design.  I then punched some red card stock using my new Martha Stewart punch.  On top of that I layered a heart cut from Gypsy Wanderings and layered another heart cut from the same file.  I embellished the hearts with coordinating black and red glitter glue.  I used ribbon embellishments from the Ribbon Boutique.  My "love" sentiment is cut from the Cricut Home Decor cartridge and was also embellished with some red glitter glue.  I think my true love will be very pleased with this card.  Thanks for stopping by and have a great week!!

Saturday, January 21, 2012

Valentine's Cards Using Cricut Imagine

The Cricut Imagine makes it so easy to create quick cards.  Sometimes my brain just gets tired of trying to come up with my own creative layouts, so the designs in the Imagine cartridges are just the trick!! I created two easy Valentine's Day cards using the Cricut Imagine More Cards and Better Together cartridges.  I embellished each with sheer white ribbon from the Ribbon Boutique and add a few glitzy accents and stickers from my stash.  The pink background papers are from the makingmemories Just Chillin' stack, on which I layered photo mats I had in my stash (sorry can't remember the maker and the package is long gone too!!).  I used foam adhesive squares to add some dimension to the die cuts.  Thanks for looking!!


A Simple Valentine

Today, for a rainy morning project, I decided to work on some pretty, but simple, Valentine's Day cards.  I used my Cricut Love Struck 2010 cartridge and my Cricut Imagine machine to create this card.  I used a pre-cut craft cardstock card as my background.  I cut a small piece of white cardstock and embellished it with one of my Martha Stewart punches, onto which I adhered my Love Struck diecut and stamped my message.  Afterwards, I added a simple ribbon and bow from ribbon by the Ribbon Boutique.  This card was easy to create, but I'm sure it will win the heart of my Valentine!!  Thanks for looking!

Monday, January 16, 2012

Embossing Thin Copper Sheeting With My Cuttlebug...........

I used my Cuttlebug and an embossing folder to create this birthday card.  These thin copper squares can be found in the woodworking section of Hobby Lobby.  I got them for Christmas and was anxious to emboss them.  I used plain brown cardstock and ribbon from the Ribbon Boutique to top a pre-cut cream colored card.  I also used some coordinating matching copper brads beside my stamped sentiment.  I think the copper embossing turned out just lovely!!
Thanks for looking!!

Fired up the Embroidery Machine for this Valentine Card!!

My Bernina embroidery machine has been feeling a little lonely lately.  I've been paying too much attention to my Cricuts!! Today I decided to dust her off and embroidered a sweet little bouquet of flowers to use as a Valentine's Day card embellishment.  I embossed the card with my Cuttlebug and a Sizzix heart folder.  I used my red Copic to color the stamped message.  I used ribbon from the Ribbon Boutique and the black and white paper is from DCWV.  Next I think I'll try to use some freestanding lace embroidery in a card!!  I just desperately need a snow day to work on my crafty creations!! Just an inch or two will do!!   Thanks for looking!

A Cowboy Shadow Box

I was anxious to try one of the images I recently purchased from  I took advantage of their 25% off sale this weekend and ordered some starter designs. I have the original Cricut Expression which I do not update so that I may continue to use my Sure Cuts Alot 2 software.  I also used my Cricut Imagine and elements from the Old West and Country Carnival cartridges.  The words are from the purchased svg file.  The die cuts are from the Cricut cartridges.  I cut the wording in brown vinyl and adhered it to cream colored card stock.  I inked the card stock heavily with my Martha Stewart cat's eye ink pad, in brown. I also used some stickers from the Paper Studio.  Finally before placing the picture into the shadow box, I looped some knotted jute twine around the inside of the box.  I think this little shadow box will be a perfect accent to my cowboy husband's bathroom!!  Thanks for looking!!

My New Craft Area!!!! Almost Complete!!

My husband and I have been working on our new crafting area this long weekend.  I am moving my craft stuff from a basement room upstairs.  Last year, disaster struck our house in the form of termites. We had self-treated our log and wood frame house but had never professionally exterminated. Boy did we learn a lesson the hard way! A 20 foot section of our front living room wall had been eaten away before we realized it!!  This was October of last year.  We worked away to tear out the wall, replace it, get professional extermination, all before cold weather attacked. I had always wanted a fireplace, so we used this opportunity to lay a beautiful stone fireplace.  I never knew I could lay stone, but its really alot like icing a cake.  The results were phenomenal.  I was ever so pleased with the results and we have really enjoyed the fireplace's warmth and ambience during the cold,dreary months.   My husband also started doing leatherwork last year.  He had a small countertop set up on the back side of our living room.  He really enjoys leathercrafting near the fireplace.  I soon had the desire to move my craft space closer to his and the fire!! We moved a set of kitchen cabinets that I previously used in my basement sewing room.  My handyman husband built us a custom crafting island with storage under one side and on both ends.  There is an inset area for barstools on the other side.  My Cricut cartridges fit perfectly in the built in shelves on one end of the island.  I put a small desk near the windows, which I just outfitted with wooden blinds, for my sewing maching.  I like to sew and embroider on my Bernina and the natural light is wonderful.  I had recently bought four Jet Max cubes for paper storage.  I place two stacked, on each side of my desk.  My cabinet drawers neatly store all my wooden stamps, Cricut accessories, fabric, and sewing notions.  I have extra storage in the baskets and bags on top of the wall cabinets.  I brought my new Expression 2 from my office space and placed it on the countertop with my Cake and Imagine.  I'll keep my trusty, original Expression near my desktop computer where it will stay hooked to Design Studio.  To finish today's work, we mounted a cork board, shelf for my Cuttlebug and Texture Boutique, and a ribbon shelf above my crafting countertop.  Our next step is to install two hanging lights above our center island and some outlets along the top of the countertop itself.  I think I am going to love my new space and crafting by the fireplace!! Thanks for stopping by!!! Patty